返回首页 公司简介 产品展示 产品色卡 新闻中心 行业动态 在线留言 联系我们
  环氧树脂地坪工程系列
     环氧树脂砂浆滚涂地坪
     环氧树脂自流平地坪
     环氧砂浆自流平地坪
     环氧树脂水性地坪
     环氧树脂滚涂地坪
  耐磨地坪工程系列
     水泥自流平地坪
     压模地坪
     金刚砂耐磨地坪
     混凝土密封固化剂
  防静电地坪工程系列
     环氧防静电自流平地坪
     环氧防静电薄涂地坪
     全钢高架防静电地板
     PVC防静电地板
  工业防腐地坪工程系列
     防腐玻纤型环氧地坪
     乙烯基酯重防腐地坪
  地下停车场地坪工程系列
     停车场地坪
     无震动止滑车道
  运动场地坪工程系列
     PU球场
     PU跑道
  无锡市名轩装饰材料有限公司
地 址:无锡高新技术开发区鸿山镇
电 话:0510-66889376
传 真:0510-88582949
邮 箱:mingxwx@163.com
冯士军:13506190899
网 址:http://www.mingx-wx.com
 
当前位置 -> 首页新闻资讯地坪漆厂家关于南京环氧地坪漆常见固化问题总结 发布时间:(2019/5/31)

地坪漆厂家关于南京环氧地坪漆常见固化问题总结

 

环氧地坪漆常见的固化问题主要有:固化不均、固化不良、表面发黏、表面发白和不固化。下面南京环氧地坪厂家就给大家分析环氧地坪漆常见固化问题的原因。环氧地坪漆漆膜部分出现软和硬的涂膜状态。这主要是环氧地坪材料主漆与固化剂在混合容器里搅拌不良,混合不均匀。环氧地坪漆厂家建议大家在进行配料时采用搅拌器充分搅拌再使用。

The common curing problems of epoxy floor paint are uneven curing, poor curing, surface sticking, surface whitening and non-curing. The following epoxy floor paint manufacturers will give you an analysis of the reasons for the common curing problems of epoxy floor paint. 

1、固化不均

1. Non-uniform curing

环氧地坪漆漆膜部分出现软和硬的涂膜状态。这主要是地坪材料主漆与固化剂在混合容器里搅拌不良,混合不均匀。地坪漆厂家建议大家在进行配料时采用搅拌器充分搅拌再使用。

The film of epoxy floor paint is soft and hard. This is mainly due to the poor mixing and uneven mixing of the main paint and curing agent in the mixing container. Floor paint manufacturers recommend that we use mixer to mix and reuse the ingredients.

2、固化不良

2. Poor curing

整个漆膜固化状态差,重物或人员走动有压痕。这种现象主要是施工环境温度太低、反应不完全,或固化剂加入比例不符。光磊地坪漆厂家提醒大家地坪漆最佳施工温度是在5-35℃,配料时采用电子秤严格按照配比进行调配材料。

The whole film is in poor solidification state, and there are indentations in the movement of heavy objects or personnel. This phenomenon is mainly due to the construction environment temperature is too low, the reaction is not complete, or the proportion of curing agent does not match. Guanglei floor paint manufacturer reminds you that the best construction temperature of floor paint is 5-35 C. When mixing, electronic scales are used to mix materials strictly according to the proportion.

3、表面发黏不干

3. Surface stickiness

初凝时,环氧地坪漆表面发黏。主要原因是整个涂料的搅拌不充分,造成未反应的成分在表面下游离。

The surface of epoxy floor paint sticks when it is first set. The main reason is the inadequate stirring of the whole coating, which causes the unreacted components to be separated from the surface.

4、表面发白

4. Surface whitening

环氧地坪漆表面仿佛有层云雾。这主要是因为施工环境潮气重,涂膜上易结霜,或固化剂含水,使得固化剂里的胺析出产生白雾集结在表面。

There seems to be a cloud on the surface of epoxy floor paint. This is mainly due to the heavy humidity of the construction environment, the easy frosting on the coating, or the moisture content of the curing agent, which makes the amine precipitation in the curing agent produce white fog on the surface.

5、不固化

5. Non-curing

环氧地坪漆施工后一直不固化。主要原因是固化剂加量不准或加错;环境温度过低(低于5℃以下)。

Epoxy floor paint does not solidify after construction. The main reason is that the dosage of curing agent is inaccurate or wrong; the ambient temperature is too low (below 5 C).



来源:  浏览次数:32
相关阅读:讲解水性环氧地坪漆施工条件及施工注意事项 | 环氧地坪漆施工后存在色差的原因及解决办法 | 当无锡环氧地坪漆需要维修、重新涂装时怎么操作
 
版权所有:无锡市名轩装饰材料有限公司   地址:无锡高新技术开发区鸿山镇   电话:0510-66889376  传真:0510-88582949
邮箱:mingxwx@163.com  冯士军:13506190899  网 址:http://www.mingx-wx.com 苏ICP备12054068号-1